diff --git a/.gitignore b/.gitignore
index 39a44e6..c18220d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,3 +15,4 @@ dist/
 **/target/
 **/test-plugins/
 **/Charts/
+network-dev/
diff --git a/assets/logo.png b/assets/logo.png
new file mode 100644
index 0000000..ec06df1
Binary files /dev/null and b/assets/logo.png differ
diff --git a/network-dev/wifi-sim.sh b/network-dev/wifi-sim.sh
deleted file mode 100755
index f3b2cea..0000000
--- a/network-dev/wifi-sim.sh
+++ /dev/null
@@ -1,310 +0,0 @@
-#!/bin/bash
-# =============================================================================
-# wifi-sim.sh — Virtual WiFi environment for development & testing
-#
-# Creates 3 dummy networks using mac80211_hwsim + hostapd:
-#   - FreeWifi       (open,  strong signal, ch 1)
-#   - OfficeNetwork  (open,  medium signal, ch 6)
-#   - HomeNetwork    (WPA2,  weak signal,   ch 11)
-#
-# Usage:
-#   sudo ./wifi-sim.sh start
-#   sudo ./wifi-sim.sh stop
-#   sudo ./wifi-sim.sh status
-# =============================================================================
-
-set -euo pipefail
-
-# --- User configuration ------------------------------------------------------
-
-SSID_STRONG="FreeWifi"      # Open network, strong signal
-SSID_MEDIUM="OfficeNetwork" # Open network, medium signal
-SSID_SECURE="HomeNetwork"   # WPA2 network, weak signal
-WIFI_PASSWORD="testpassword123"
-
-# TX power levels in mBm (millibel-milliwatts). Higher = stronger signal.
-# These affect the RSSI reported to scanning clients.
-TXPOWER_STRONG=3000 # 30 dBm
-TXPOWER_MEDIUM=1500 # 15 dBm
-TXPOWER_WEAK=100    #  1 dBm
-
-RUN_DIR="/tmp/wifi-sim"
-
-# --- Helpers -----------------------------------------------------------------
-
-die() {
-	echo "ERROR: $*" >&2
-	exit 1
-}
-info() { echo "[*] $*"; }
-ok() { echo "[+] $*"; }
-
-require_cmds() {
-	local missing=()
-	for cmd in "$@"; do
-		command -v "$cmd" &>/dev/null || missing+=("$cmd")
-	done
-	if [[ ${#missing[@]} -gt 0 ]]; then
-		die "Missing required tools: ${missing[*]}
-       Install with: sudo apt install hostapd wpasupplicant iw"
-	fi
-}
-
-get_phy_for_iface() {
-	iw dev "$1" info | awk '/wiphy/{print "phy"$2}'
-}
-
-# --- Start -------------------------------------------------------------------
-
-cmd_start() {
-	[[ $EUID -ne 0 ]] && die "Please run as root:  sudo $0 start"
-	require_cmds hostapd iw ip
-
-	if [[ -d "$RUN_DIR" && -f "$RUN_DIR/interfaces" ]]; then
-		die "wifi-sim appears to already be running. Run 'sudo $0 stop' first."
-	fi
-	mkdir -p "$RUN_DIR"
-
-	# Snapshot existing wlan interfaces so we can identify the new ones
-	info "Snapshotting existing interfaces..."
-	BEFORE=($(iw dev 2>/dev/null | awk '/Interface/{print $2}' | grep -v '^hwsim' || true))
-
-	# Load the kernel module with 4 radios (3 APs + 1 client)
-	info "Loading mac80211_hwsim (4 radios)..."
-	if lsmod | grep -q mac80211_hwsim; then
-		die "mac80211_hwsim is already loaded. Run 'sudo $0 stop' or 'sudo rmmod mac80211_hwsim' first."
-	fi
-	modprobe mac80211_hwsim radios=4
-	sleep 1 # Give the kernel a moment to register all interfaces
-
-	# Find the interfaces created by our modprobe
-	AFTER=($(iw dev 2>/dev/null | awk '/Interface/{print $2}' | grep -v '^hwsim'))
-	NEW_IFACES=()
-	for iface in "${AFTER[@]}"; do
-		[[ ! " ${BEFORE[*]:-} " =~ " $iface " ]] && NEW_IFACES+=("$iface")
-	done
-
-	if [[ ${#NEW_IFACES[@]} -lt 4 ]]; then
-		rmmod mac80211_hwsim 2>/dev/null || true
-		die "Expected 4 new wlan interfaces, found ${#NEW_IFACES[@]}. Check 'dmesg' for errors."
-	fi
-
-	AP1="${NEW_IFACES[0]}"    # Will host SSID_STRONG
-	AP2="${NEW_IFACES[1]}"    # Will host SSID_MEDIUM
-	AP3="${NEW_IFACES[2]}"    # Will host SSID_SECURE
-	CLIENT="${NEW_IFACES[3]}" # Client-side interface for your code to use
-
-	info "Interfaces assigned: AP1=$AP1  AP2=$AP2  AP3=$AP3  Client=$CLIENT"
-	echo "$AP1 $AP2 $AP3 $CLIENT" >"$RUN_DIR/interfaces"
-
-	# Prevent NetworkManager from fighting us over these interfaces
-	if command -v nmcli &>/dev/null && nmcli general status &>/dev/null 2>&1; then
-		info "Marking interfaces as unmanaged in NetworkManager..."
-		for iface in "$AP1" "$AP2" "$AP3"; do
-			nmcli device set "$iface" managed no 2>/dev/null || true
-		done
-
-		nmcli device set "$CLIENT" managed yes
-	fi
-
-	# Set TX power on each physical radio to simulate signal strength differences.
-	# mac80211_hwsim factors TX power into the RSSI reported to scanning clients.
-	# Note: for precise RSSI control, consider 'wmediumd' (a wireless medium daemon).
-	info "Setting TX power levels for signal strength simulation..."
-	PHY1=$(get_phy_for_iface "$AP1")
-	PHY2=$(get_phy_for_iface "$AP2")
-	PHY3=$(get_phy_for_iface "$AP3")
-
-	iw phy "$PHY1" set txpower fixed $TXPOWER_STRONG
-	iw phy "$PHY2" set txpower fixed $TXPOWER_MEDIUM
-	iw phy "$PHY3" set txpower fixed $TXPOWER_WEAK
-
-	# --- hostapd config: AP1 (open, strong, channel 1) -----------------------
-	cat >"$RUN_DIR/ap1.conf" <<EOF
-interface=$AP1
-driver=nl80211
-ssid=$SSID_STRONG
-hw_mode=g
-channel=1
-auth_algs=1
-wmm_enabled=0
-ignore_broadcast_ssid=0
-EOF
-
-	# --- hostapd config: AP2 (open, medium, channel 6) -----------------------
-	cat >"$RUN_DIR/ap2.conf" <<EOF
-interface=$AP2
-driver=nl80211
-ssid=$SSID_MEDIUM
-hw_mode=g
-channel=6
-auth_algs=1
-wmm_enabled=0
-ignore_broadcast_ssid=0
-EOF
-
-	# --- hostapd config: AP3 (WPA2, weak, channel 11) ------------------------
-	cat >"$RUN_DIR/ap3.conf" <<EOF
-interface=$AP3
-driver=nl80211
-ssid=$SSID_SECURE
-hw_mode=g
-channel=11
-auth_algs=1
-wpa=2
-wpa_passphrase=$WIFI_PASSWORD
-wpa_key_mgmt=WPA-PSK
-rsn_pairwise=CCMP
-wmm_enabled=0
-ignore_broadcast_ssid=0
-EOF
-
-	# Start a hostapd instance for each AP
-	info "Starting hostapd instances..."
-	hostapd -B -P "$RUN_DIR/ap1.pid" "$RUN_DIR/ap1.conf" \
-		>"$RUN_DIR/ap1.log" 2>&1 ||
-		{
-			cat "$RUN_DIR/ap1.log"
-			die "hostapd failed for AP1. See log above."
-		}
-
-	hostapd -B -P "$RUN_DIR/ap2.pid" "$RUN_DIR/ap2.conf" \
-		>"$RUN_DIR/ap2.log" 2>&1 ||
-		{
-			cat "$RUN_DIR/ap2.log"
-			die "hostapd failed for AP2. See log above."
-		}
-
-	hostapd -B -P "$RUN_DIR/ap3.pid" "$RUN_DIR/ap3.conf" \
-		>"$RUN_DIR/ap3.log" 2>&1 ||
-		{
-			cat "$RUN_DIR/ap3.log"
-			die "hostapd failed for AP3. See log above."
-		}
-
-	# Bring up the client interface so it's ready to scan/connect
-	ip link set "$CLIENT" up
-
-	# --- Summary -------------------------------------------------------------
-	ok "Virtual WiFi environment is up!"
-	echo ""
-	echo "  Networks:"
-	echo "  ┌──────────────────┬──────────┬────────┬─────────────┐"
-	echo "  │ SSID             │ Security │ Signal │ Interface   │"
-	echo "  ├──────────────────┼──────────┼────────┼─────────────┤"
-	printf "  │ %-16s │ %-8s │ %-6s │ %-11s │\n" "$SSID_STRONG" "Open" "Strong" "$AP1"
-	printf "  │ %-16s │ %-8s │ %-6s │ %-11s │\n" "$SSID_MEDIUM" "Open" "Medium" "$AP2"
-	printf "  │ %-16s │ %-8s │ %-6s │ %-11s │\n" "$SSID_SECURE" "WPA2" "Weak" "$AP3"
-	echo "  └──────────────────┴──────────┴────────┴─────────────┘"
-	echo ""
-	echo "  WPA2 password : $WIFI_PASSWORD"
-	echo "  Client iface  : $CLIENT  (use this in your code)"
-	echo ""
-	echo "  Useful commands:"
-	echo "    Scan for networks : sudo iw dev $CLIENT scan | grep -E 'SSID|signal'"
-	echo "    Connect (open)    : sudo iw dev $CLIENT connect \"$SSID_STRONG\""
-	echo "    Connect (WPA2)    : sudo wpa_supplicant -Dnl80211 -i$CLIENT \\"
-	echo "                          -c <(wpa_passphrase \"$SSID_SECURE\" \"$WIFI_PASSWORD\")"
-	echo "    Stop simulation   : sudo $0 stop"
-	echo ""
-	echo "  Logs: $RUN_DIR/ap{1,2,3}.log"
-}
-
-# --- Stop --------------------------------------------------------------------
-
-cmd_stop() {
-	[[ $EUID -ne 0 ]] && die "Please run as root:  sudo $0 stop"
-
-	info "Stopping virtual WiFi environment..."
-	local had_something=false
-
-	# Kill hostapd processes via PID files
-	for ap in ap1 ap2 ap3; do
-		PID_FILE="$RUN_DIR/$ap.pid"
-		if [[ -f "$PID_FILE" ]]; then
-			PID=$(cat "$PID_FILE")
-			if kill "$PID" 2>/dev/null; then
-				info "Stopped hostapd for $ap (PID $PID)"
-			fi
-			rm -f "$PID_FILE"
-			had_something=true
-		fi
-	done
-
-	# Re-enable NetworkManager management for these interfaces
-	if [[ -f "$RUN_DIR/interfaces" ]]; then
-		read -r AP1 AP2 AP3 CLIENT <"$RUN_DIR/interfaces"
-		if command -v nmcli &>/dev/null; then
-			for iface in "$AP1" "$AP2" "$AP3" "$CLIENT"; do
-				nmcli device set "$iface" managed yes 2>/dev/null || true
-			done
-		fi
-	fi
-
-	# Unload the kernel module (also destroys all virtual interfaces)
-	if lsmod | grep -q mac80211_hwsim; then
-		info "Unloading mac80211_hwsim..."
-		rmmod mac80211_hwsim && had_something=true
-	fi
-
-	# Clean up runtime directory
-	rm -rf "$RUN_DIR"
-
-	if $had_something; then
-		ok "Virtual WiFi environment stopped."
-	else
-		echo "Nothing was running."
-	fi
-}
-
-# --- Status ------------------------------------------------------------------
-
-cmd_status() {
-	if [[ ! -f "$RUN_DIR/interfaces" ]]; then
-		echo "wifi-sim is not running."
-		return
-	fi
-
-	read -r AP1 AP2 AP3 CLIENT <"$RUN_DIR/interfaces"
-	echo "wifi-sim is running."
-	echo ""
-	echo "  Interfaces:"
-	for iface in "$AP1" "$AP2" "$AP3" "$CLIENT"; do
-		STATE=$(ip link show "$iface" 2>/dev/null | awk '/state/{print $9}' || echo "unknown")
-		CHANNEL=$(iw dev "$iface" info 2>/dev/null | awk '/channel/{print $2}' || echo "?")
-		printf "  %-10s  state=%-4s  channel=%s\n" "$iface" "$STATE" "$CHANNEL"
-	done
-	echo ""
-	echo "  Processes:"
-	for ap in ap1 ap2 ap3; do
-		PID_FILE="$RUN_DIR/$ap.pid"
-		if [[ -f "$PID_FILE" ]]; then
-			PID=$(cat "$PID_FILE")
-			if kill -0 "$PID" 2>/dev/null; then
-				echo "  hostapd ($ap)  PID=$PID  running"
-			else
-				echo "  hostapd ($ap)  PID=$PID  DEAD (check $RUN_DIR/$ap.log)"
-			fi
-		fi
-	done
-}
-
-# --- Entry point -------------------------------------------------------------
-
-case "${1:-help}" in
-start) cmd_start ;;
-stop) cmd_stop ;;
-status) cmd_status ;;
-*)
-	echo "Usage: sudo $0 {start|stop|status}"
-	echo ""
-	echo "  start   Load mac80211_hwsim and bring up 3 virtual APs"
-	echo "  stop    Tear down all virtual interfaces and unload module"
-	echo "  status  Show current state of interfaces and processes"
-	echo ""
-	echo "Networks created on start:"
-	printf "  %-16s  open,  strong signal\n" "$SSID_STRONG"
-	printf "  %-16s  open,  medium signal\n" "$SSID_MEDIUM"
-	printf "  %-16s  WPA2,  weak signal   (password: $WIFI_PASSWORD)\n" "$SSID_SECURE"
-	;;
-esac